The commercial wheelchair lift Canada market has developed rapidly in recent years. We can see that wheelchair elevators are equipped in many public places, such as hospitals, stations, and schools. Its has greatly facilitated the travel of the disabled and the elderly. The installation of the elevator is relatively simple, because it does not require additional assembly. Most wheelchair elevators are fully assembled and can be customized according to the local voltage. You can choose from 220V, 240V, 400V, and 380V.

Commercial wheelchair lift Canada has the main features :

1. Lifting is driven by hydraulic system, which need only a small space

2. According to different materials, it can be divided into powder coating type and stainless steel type.

3. With boarding ramps, non-slip templates, handrails, smooth lifting and other details, to bring users a pleasant experience.

4. Control panels and platforms on each floor, and equipped with remote controls.

5. Equipped with various safety devices: such as safety locks, safety sensors, emergency lowering devices, emergency stop devices, etc.

The direction of the entrance and exit of the wheelchair lift elevator can be determined according to the site conditions. It can be a 90-degree opening or a opposite opening. If the entrance and exit directions of the first and second floors are different.

The height of the car of the wheelchari lift elevator is not fixed. It is customized. The unobstructed height is about 1-3 meters. Various warning devices are installed inside the car, and it is equipped with folding pedals to facilitate the elderly and the disabled to get on and off. Of course, you can choose a fully enclosed or semi-enclosed car. The height of the car can be designed according to the height of the top floor. The height of the half car is about 1.5 meters.

Commercial wheelchair lift Canada has these main functions and safey devices:

1. Overload protection: over-current relay control

2. Emergency stop button: press the emergency stop button to stop the lifting process immediately.

3. Safety sensor at the bottom of the platform,The safety sensor is connected to the limit switch. Once it bottoms out, the elevator stops.During the descent of the elevator, once pets or pets enter the bottom of the elevator, the elevator can stop and protect them.

4. Automatic turnover: the elevator will turn up automatically after rising, and the wheelchair can be prevented from sliding out when there is no door.

5. Safety lock: the elevator cannot work due to improper operation.

Standard function:

• Automatic descending folding ramp

• Weatherproof control

• 400 kg lifting capacity

• Independent up and down button switches with key switch control

• Emergency stop switch on the platform-press to stop

• Welded steel pipe structure

•Fully enclosed steel bottom safety plate